1. The product complies with the national standard of GB / T 24689.2-2017 insect killing lamp for plant protection machinery. (provide the inspection report in accordance with GB / t24689.2-2017 issued by the National Agricultural Machinery Quality Supervision and inspection center)
2. Battery: 12V / 20Ah lithium iron phosphate battery.
3. Solar panel: single crystal silicon, power: ≥ 40wp, service life: 15-20 years.
4. Standby power consumption: standby power ≤ 0.5W.
5. Height: lamp cap size 710mm × 240mm × 240mm, the whole lamp height is 2.3m, the lamp pole is made of square stainless steel, and the whole is sprayed with plastic.
6. LED light source, wavelength 320-500nm, power 8W, service life ≥ 5000 hours. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
7. Fan specification: 7W / 12V, speed 2200 rpm, air inlet φ 170mm, waterproof grade IP68, service life ≥ 20000 hours.
8. Anti jamming function of fan: the fan has anti jamming function and can work normally after jamming test. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
9. Reliability index: large mean time between failures
5000 hours, design life: ≥ 5 years (excluding vulnerable parts fan and lamp tube)
10. Light control function: automatically switch the light according to the alternation of day and night. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
11. Time control function: according to the living habits of insects, the control mode can be set for 8 time periods (the lighting time at night can be adjusted from 3 to 10 hours).
12. Short circuit protection: when the output terminal is short circuited, there will be no breakdown and damage, and the circuit can still work normally after it is restored to normal.
13. The obvious parts of the lamp body shall be provided with safety signs complying with the provisions of GB 10396. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
14. Protection grade: ≥ ipx5. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
15. Control area: 30-60 Mu (1 Mu =666 m2)
