1. The product complies with the national standard of GB / T 24689.2-2017 insect killing lamp for plant protection machinery. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
2. It has Internet of things access port.
3. The power grid is connected by square stainless steel double-layer vertical network, with wire φ ≥2mm。
4. Power grid voltage: 6000 ± 500V, equipped with power grid overcurrent and short circuit protection device to prevent power grid short circuit caused by insect residues. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
5. Net spacing ≤ 10mm, can be selected according to different target pests.
6. Insulation column: instant high temperature resistance of 1000 ℃, corrosion resistance and high voltage resistance. In rainy days, the high-voltage power grid is continuously arced for 30min, and the insulation column is free of carbonization. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
7. Light control function: automatically switch the light according to the alternation of day and night. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
8. Rain control function: when the humidity is greater than 95% RH, the frequency vibration lamp can enter the automatic protection state. When the humidity is not greater than 95% RH, it can resume normal operation. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
9. Low temperature protection: when the temperature is lower than 5 ℃, start the automatic protection state.
10. The fixed support angle of high-voltage power grid shall be made of flame retardant material.
11. Insect catching method: yellow insect catching bucket (size；215mm × 215mm × 150mm), equipped with anti escape device and automatic drainage function.
12. One key setting function: according to the living habits of insects, you can set 8 time periods (the lighting time at night is adjustable from 3 to 10 hours).
13. One key test function: press the test key to turn on the voltage of the power grid and the lamp, which is convenient for the user to test whether the power grid and the lamp circuit of the insect killing lamp are normal.
14. Trapping light source: frequency oscillation lamp power 15W (wavelength 320-680nm), service life > 5000 hours. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
15. Impact area: ≥ 0.25 ㎡. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
16. The whole lamp is 3M high and the main structure is made of stainless steel, φ ≥ 60mm, wall thickness ≥ 1.2mm.
17. Solar panel: single crystal silicon, power: ≥ 40wp, service life: 15-20 years.
18. Power supply: 12V / 20Ah lithium iron phosphate battery or 12V / 24Ah colloidal battery.
19. Controller: it has light control, time control and rain control functions, self power consumption < 10 MA (no-load), eliminates stroboscopic phenomena, has anti reverse charging, anti overcharge, anti discharge, anti short circuit, anti lightning, and temperature compensation protection functions, and the dust and waterproof level is equal to or greater than ipx5. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
20. Mechanical strength of lamp body shell: the shell shall be free from cracking after being impacted with 0.5j impact energy for 4 times at every possible weak point of the shell with a spring impactor. (provide the inspection report issued by the third party inspection agency).
21. The connecting plastic parts (lamp caps) of the insect killing lamp are made of flame retardant material, with an outer diameter of 12.3 ± 2mm and an inner diameter of 8 ± 1mm, reaching grade v0. (provide the original inspection report at or above the provincial level)
22. It shall have the application test report of insecticidal lamp issued by agricultural scientific research institutions at or above the provincial level (supporting documents shall be provided).
23. The obvious parts of the lamp body shall have safety signs in accordance with GB 10396. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
24. Power start time ≤ 3S. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
25. Booster protection: the booster is provided with protection measures, and there is no breakdown or burning in the working environment. (provide the inspection report issued by the National Agricultural Machinery Quality Supervision and inspection center)
26. Single lamp control area: 30-60 mu.(1 Mu =666 m2)
